Products
COREF Co., Ltd.
Paints & Exterior Coats
ARTY CEMENT MORTAR
Arty Cement Mortar(KS F 4716) is a base paint material of a building and is used for insulation building construction systems, especially depending on the site situation that requires flexibility, construction, and durability due to its excellent adhesion and penetration.
Usage
(KSF4716) As a basis coating material of a building,
- Application for attaching EPS, PF, urethane foam, etc. and for mid-mash impregnation plastering application for exterior wall insulation construction
- Use for pretreatment concrete surfaces, mortar surfaces, and repairing slab floors etc
- Application for attaching EPS, PF, urethane foam, etc. and for mid-mash impregnation plastering application for exterior wall insulation construction
- Use for pretreatment concrete surfaces, mortar surfaces, and repairing slab floors etc
Properties
- Main ingredients: special acrylic co-polymer, filler
- Mixing ratio: Arty Cement Mortar: Cement = 1:1
- Color: Light White
- pH : 8 ~ 9
- Solid content (%): 65 ± 1%
- Viscosity (cps): 30,000 ± 11,000
- Theoretical Quantity For Application: 2.5–4 kg/㎡ (Criterion for external insulation application)
- Pot Life: Within 1 hour after cement mixing (added or subtracted depending on site conditions)
- Drying time (dry hard): 12 hours in summer, 24 hours in winter
- Shelf life: 12 months (Unopened indoor storage)
- Packing unit: 22 kg / Plastic Pail
- Mixing ratio: Arty Cement Mortar: Cement = 1:1
- Color: Light White
- pH : 8 ~ 9
- Solid content (%): 65 ± 1%
- Viscosity (cps): 30,000 ± 11,000
- Theoretical Quantity For Application: 2.5–4 kg/㎡ (Criterion for external insulation application)
- Pot Life: Within 1 hour after cement mixing (added or subtracted depending on site conditions)
- Drying time (dry hard): 12 hours in summer, 24 hours in winter
- Shelf life: 12 months (Unopened indoor storage)
- Packing unit: 22 kg / Plastic Pail
Application Method
■ External wall insulation construction method
- Completely remove any foreign substances such as rust, dust, moisture, and oil on the surface and apply primer.
- Adhere the Styrofoam board closely to the concrete wall using Arty cement mortar.
- After drying, add a mesh to the top of the adhered Styrofoam board and plaster it with a mixed mortar.
- After drying, construct with plaster or various Arty Exterior wall Finish Coats.
■ Cement Board Mesh construction method
- Completely remove any foreign substances such as rust, dust, moisture, and oil on the surface and apply primer.
- Adhere to a joint mesh on the wall finished with a cement board using an Arty cement mortar.
- After drying, add a mesh to the top of the adhered Styrofoam board and plaster it with a mixed mortar.
- After drying, construct with plaster or various Arty Exterior wall Finish Coats.
- Completely remove any foreign substances such as rust, dust, moisture, and oil on the surface and apply primer.
- Adhere the Styrofoam board closely to the concrete wall using Arty cement mortar.
- After drying, add a mesh to the top of the adhered Styrofoam board and plaster it with a mixed mortar.
- After drying, construct with plaster or various Arty Exterior wall Finish Coats.
■ Cement Board Mesh construction method
- Completely remove any foreign substances such as rust, dust, moisture, and oil on the surface and apply primer.
- Adhere to a joint mesh on the wall finished with a cement board using an Arty cement mortar.
- After drying, add a mesh to the top of the adhered Styrofoam board and plaster it with a mixed mortar.
- After drying, construct with plaster or various Arty Exterior wall Finish Coats.
Precautions
- During construction, the temperature should be at least 0°C and should be sufficiently dried. If it is not dried enough, the adhesion decreases, and the appears black due to a valleys occur in the finishing coat construction.
- When blending, sufficient mixing must be performed, and excessive cement mixing can cause poor adhesion or cracking.
- Mortar Adhesives mixed with cement should be used quickly. The mortar adhesive that remains after mixing with cement will harden quickly and should be discarded.
- The product should not be exposed to rain before and after work.
- Do not freeze the product, keep it indoors (storage temperature 5~35℃) avoiding fire and direct sunlight, and store it unopened facing the top. Store the remaining product after use without cement mixing in the same way.
- When blending, sufficient mixing must be performed, and excessive cement mixing can cause poor adhesion or cracking.
- Mortar Adhesives mixed with cement should be used quickly. The mortar adhesive that remains after mixing with cement will harden quickly and should be discarded.
- The product should not be exposed to rain before and after work.
- Do not freeze the product, keep it indoors (storage temperature 5~35℃) avoiding fire and direct sunlight, and store it unopened facing the top. Store the remaining product after use without cement mixing in the same way.
Construction example
Color Charts
