Skip to content Skip to main menu

Products

COREF Co., Ltd.

Paints & Exterior Coats

ARTY STONE

ARTY STONE uses soft chips as a natural granite and marble-textured finishing coat, and it is a high-quality plastering finish coat that maximizes the luxury of chips while maintaining the natural stone feel.
This quasi-non-combustible finishing coat has excellent water resistance, durability, alkaline resistance, and pollution resistance for internal and external applications.

Usage

Internal and external concrete and cement surfaces
The exterior of a low-rise apartment building, Buildings, Hotels, Villas, Country houses, etc

Properties

- Color : 25 Colors and Custom Colors
- Viscosity : 30,000 ± 5,000
- Specific gravity : 1.75 ± 0.05
- Theoretical Quantity For Application : 3 – 3.5 kg/㎡
- Shelf life : 6 months (Indoor storage at 5-35℃ unopened)
- Packing unit : 23 kg / Plastic Pail

Application Method

- Work surface preparation: Mesh finish on concrete or insulation board surfaces and flatten the bumps or mesh projections with an artificial mortar.
- Primer painting : The paint surface should be cured sufficiently for 2 to 3 days, and paint once or twice with an Arty Color Primer.
- Working with ink lines and Masonry joints Determine the part of the Masonry joint and do the ink line work. Work the PVC joint along the indicated ink line using a silicon coke.
- Before Plastering work the Arty Stone, mix it using an electric mixer, and if necessary, add water within 2%.
- Trowel finish : Apply evenly within 1~1.5mm using a trowel, spray water lightly with a sprayer 2~3 minutes later, and do a flat plastering with a trowel.
- Remove the PVC masonry joints.
- Top coating : Paint with Arty Ceramic Nano Coat or transparent Arty Silicon Coat.

Precautions

- Be careful when the outside temperature drops below 5°C during painting or before complete drying after painting, which may cause problems with coating and adhesion.
- During construction, work at temperatures between 5°C and 35°C and 85% humidity or lower.
- The working surface shall be protected from damage caused by weather conditions such as rain, snow, etc. and impact for at least 48 hours after finishing.
- Do not mix with other paints.
- Store at room temperature (5-35℃) because freezing the product will cause defects in the coating.
- Even if it is a product of the same product, color, and LOT, the appearance may vary depending on the dilution ratio, painting equipment, and painting method, so paint with the same LOT product, painting equipment, and method as much as possible.
- Dispose of waste paint through a waste disposal company designated by the Ministry of Environment.
- Use the product within the storage period (marked on the label).

Construction example

Color Charts


Technical Information

관련서류