Products
COREF Co., Ltd.
Paints & Exterior Coats
ARTY STUCCO
ARTY STUCCO(KS F 4715) is a thin finish wall paint material consisting of standard acrylic polymer, inorganic powder, aggregates, and fibers, which can create various patterns using spray and pattern rollers on the inner and outer walls of concrete buildings.
Usage
External finishing materials requiring pollution resistance, durability, and weather resistance of concrete and cement surfaces.
Luxury villas, houses, consignment facilities, public facilities, etc
Luxury villas, houses, consignment facilities, public facilities, etc
Properties
- Color : 50 Colors and Custom Colors
- Viscosity : 25,000 ± 5,000
- Specific gravity : 1.65 ± 0.05
- Theoretical Quantity For Application : 1.5 - 3.5 kg/㎡ (The amount required varies depending on the shape and pattern)
- Shelf life : 6 months (Indoor storage at 5-35℃ unopened)
- Packing unit : 24 kg / Plastic Pail
- Viscosity : 25,000 ± 5,000
- Specific gravity : 1.65 ± 0.05
- Theoretical Quantity For Application : 1.5 - 3.5 kg/㎡ (The amount required varies depending on the shape and pattern)
- Shelf life : 6 months (Indoor storage at 5-35℃ unopened)
- Packing unit : 24 kg / Plastic Pail
Application Method
- Work surface preparation: Mesh finish on concrete or insulation board surfaces and flatten the bumps or mesh projections with an Arty Cement Mortar.
- Work surface curing: Curing the work surface sufficiently for 2 to 3 days.
- Mix using an electric mixer before plastering with Arty Stucco, and if necessary, add within 2% of water and mix.
- Uneven spray pattern : Use a bontile spray gun to spray fine so that the wall is covered up. Paint once or twice with an Arty Color Primer.
- When requesting masonry joint, determine the width and install it in advance with an ink line.
- Bumpy pattern spray work : Use a bontile spray gun to spray fine so that the wall is covered up. The size of the bumpy pattern depends on the nozzle pressure.
- Pressing pattern spray work : Use a bontile spray gun to adjust the nozzle pressure to adjust the size of the pattern and spray evenly.
- After 2 to 3 minutes, use an oil roller to press.
- Be careful not to leave any join marks.
- Work surface curing: Curing the work surface sufficiently for 2 to 3 days.
- Mix using an electric mixer before plastering with Arty Stucco, and if necessary, add within 2% of water and mix.
- Uneven spray pattern : Use a bontile spray gun to spray fine so that the wall is covered up. Paint once or twice with an Arty Color Primer.
- When requesting masonry joint, determine the width and install it in advance with an ink line.
- Bumpy pattern spray work : Use a bontile spray gun to spray fine so that the wall is covered up. The size of the bumpy pattern depends on the nozzle pressure.
- Pressing pattern spray work : Use a bontile spray gun to adjust the nozzle pressure to adjust the size of the pattern and spray evenly.
- After 2 to 3 minutes, use an oil roller to press.
- Be careful not to leave any join marks.
Precautions
- Be careful when the outside temperature drops below 5°C during painting or before complete drying after painting, which may cause problems with coating and adhesion.
- During construction, work at temperatures between 5°C and 35°C and 85% humidity or lower.
- The working surface shall be protected from damage caused by weather conditions such as rain, snow, etc. and impact for at least 48 hours after finishing.
- Do not mix with other paints.
- Store at room temperature (5-35℃) because freezing the product will cause defects in the coating.
- Even if it is a product of the same product, color, and LOT, the appearance may vary depending on the dilution ratio, painting equipment, and painting method, so paint with the same LOT product, painting equipment, and method as much as possible.
- Dispose of waste paint through a waste disposal company designated by the Ministry of Environment.
- Use the product within the storage period (marked on the label).
- During construction, work at temperatures between 5°C and 35°C and 85% humidity or lower.
- The working surface shall be protected from damage caused by weather conditions such as rain, snow, etc. and impact for at least 48 hours after finishing.
- Do not mix with other paints.
- Store at room temperature (5-35℃) because freezing the product will cause defects in the coating.
- Even if it is a product of the same product, color, and LOT, the appearance may vary depending on the dilution ratio, painting equipment, and painting method, so paint with the same LOT product, painting equipment, and method as much as possible.
- Dispose of waste paint through a waste disposal company designated by the Ministry of Environment.
- Use the product within the storage period (marked on the label).
Construction example
Color Charts
