Products
COREF Co., Ltd.
Paints & Exterior Coats
ARTY FINISH-COAT
ARTY FINISH-COAT(KS F 4715) is a thin finishing wall paint consisting of standard acrylic polymers, inorganic powders, aggregates, fibers, etc., and is the most commonly used water-soluble finish.
It is a thin finishing wall application material that works with spray and Stainless steel trowel on the inner and outer walls of a concrete building and finishes in an uneven shape within 1~3mm thick.
It is a thin finishing wall application material that works with spray and Stainless steel trowel on the inner and outer walls of a concrete building and finishes in an uneven shape within 1~3mm thick.
Usage
External finishing materials requiring pollution resistance, durability, and weather resistance on concrete and cement surfaces.
Luxury villas, houses, consignment facilities, public facilities, etc
Luxury villas, houses, consignment facilities, public facilities, etc
Properties
- Color : 50 Colors and Custom Colors
- Viscosity : 25,000 ± 5,000
- Specific gravity : 1.72 ± 0.05
- Theoretical Quantity For Application : 2 - 2.5 kg/㎡
- Shelf life : 6 months (Indoor storage at 5-35℃ unopened)
- Packing unit : 24 kg / Plastic Pail
- Viscosity : 25,000 ± 5,000
- Specific gravity : 1.72 ± 0.05
- Theoretical Quantity For Application : 2 - 2.5 kg/㎡
- Shelf life : 6 months (Indoor storage at 5-35℃ unopened)
- Packing unit : 24 kg / Plastic Pail
Application Method
- Work surface preparation: Mesh finish on concrete or insulation board surfaces and flatten the bumps or mesh projections with an Arty Cement Mortar.
- Curing of painted surfaces: Curing the painted surfaces for 2 to 3 days sufficiently.
- When requesting wall joint pattern, determine the width and install it in advance with an ink line.
- Before Plastering work the Arty Standard Finish-Coat, stir it using an electric mixer, and if necessary, add water within 2%.
- Apply it flat within 1.5 to 2mm using a Trowel, and after 2-3 minutes, rub it left and right or up and down with a rough Trowel to form a pattern.
- Application of Mesh Method and External Insulation Method
- Curing of painted surfaces: Curing the painted surfaces for 2 to 3 days sufficiently.
- When requesting wall joint pattern, determine the width and install it in advance with an ink line.
- Before Plastering work the Arty Standard Finish-Coat, stir it using an electric mixer, and if necessary, add water within 2%.
- Apply it flat within 1.5 to 2mm using a Trowel, and after 2-3 minutes, rub it left and right or up and down with a rough Trowel to form a pattern.
- Application of Mesh Method and External Insulation Method
Precautions
- Be careful when the outside temperature drops below 5°C during painting or before complete drying after painting, which may cause problems with coating and adhesion.
- During construction, work at temperatures between 5°C and 35°C and 85% humidity or lower.
- The working surface shall be protected from damage caused by weather conditions such as rain, snow, etc. and impact for at least 48 hours after finishing.
- Do not mix with other paints.
- Store at room temperature (5-35℃) because freezing the product will cause defects in the coating.
- Even if it is a product of the same product, color, and LOT, the appearance may vary depending on the dilution ratio, painting equipment, and painting method, so paint with the same LOT product, painting equipment, and method as much as possible.
- Dispose of waste paint through a waste disposal company designated by the Ministry of Environment.
- Use the product within the storage period (marked on the label).
- During construction, work at temperatures between 5°C and 35°C and 85% humidity or lower.
- The working surface shall be protected from damage caused by weather conditions such as rain, snow, etc. and impact for at least 48 hours after finishing.
- Do not mix with other paints.
- Store at room temperature (5-35℃) because freezing the product will cause defects in the coating.
- Even if it is a product of the same product, color, and LOT, the appearance may vary depending on the dilution ratio, painting equipment, and painting method, so paint with the same LOT product, painting equipment, and method as much as possible.
- Dispose of waste paint through a waste disposal company designated by the Ministry of Environment.
- Use the product within the storage period (marked on the label).
Construction example
Color Charts
