Products
COREF Co., Ltd.
Paints & Exterior Coats
ARTY ELASTIC-WATERPROOF COAT
ARTY ELASTIC-WATERPROOF COAT is a waterproof paint made of acrylic resin that forms a coating with strong elasticity, adhesion, durability, and waterproofing.
It protects the building by preventing moisture penetration into cracks due to contraction and expansion due to temperature differences. It is a water-soluble waterproof material especially suitable for waterproofing of slab flat roofs.
It protects the building by preventing moisture penetration into cracks due to contraction and expansion due to temperature differences. It is a water-soluble waterproof material especially suitable for waterproofing of slab flat roofs.
Usage
Waterproof paint for various buildings such as concrete
Properties
- Coating surface : Base-coated concrete cement mortar
- Color : Green, Gray
- Composition : 1 liquid type
- Solid content (%) : 60 ± 1.0
- Viscosity (K.U) : 100 ~ 120
- Specific gravity : 1.25 ± 0.02
- Number of coats of paint : 2 ~ 3 times
- Dry film thickness : 1 mm
- Theoretical Quantity For Application : 2.84 kg/㎡ (1.4 kg/㎡ based on 500 μm)
- Drying time (20℃) : within 60 minutes of dryness and within 48 hours of dryness
- Thinning (dilution rate) : water, within 10%
- Shelf life : 12 months
- Packing unit: 18 kg / Plastic Pail
- Color : Green, Gray
- Composition : 1 liquid type
- Solid content (%) : 60 ± 1.0
- Viscosity (K.U) : 100 ~ 120
- Specific gravity : 1.25 ± 0.02
- Number of coats of paint : 2 ~ 3 times
- Dry film thickness : 1 mm
- Theoretical Quantity For Application : 2.84 kg/㎡ (1.4 kg/㎡ based on 500 μm)
- Drying time (20℃) : within 60 minutes of dryness and within 48 hours of dryness
- Thinning (dilution rate) : water, within 10%
- Shelf life : 12 months
- Packing unit: 18 kg / Plastic Pail
Application Method
- The concrete surface must be cured for at least 28 days, and the construction surface shall be clean without oil, rust, dust, or dirt.
- Cracks or bumps should be filled with special putty.
- Apply primer (epoxy primer) once or twice before painting.
- Paint evenly using a water-based roller or a rubber paint squeegee. Excessive dilution with water or excessive thickening of the coating may cause cracks above the paint surface.
- After 1 to 2 hours after painting once, paint evenly so that there are no joints 2 to 3 times.
- Cracks or bumps should be filled with special putty.
- Apply primer (epoxy primer) once or twice before painting.
- Paint evenly using a water-based roller or a rubber paint squeegee. Excessive dilution with water or excessive thickening of the coating may cause cracks above the paint surface.
- After 1 to 2 hours after painting once, paint evenly so that there are no joints 2 to 3 times.
Precautions
- Do not mix with other paints.
- Avoid painting on rainy days, humid days (over 85%), and days with low temperatures (below 5°C).
- Do not freeze the product, keep it indoors (storage temperature 5~35℃) avoiding fire and direct sunlight, and store it unopened facing the top.
- Store the remaining product after use without cement mixing in the same way.
- Products with frozen contents should be discarded.
- Dispose of waste paint through a waste disposal company designated by the Ministry of Environment.
- Use the product within the storage period (marked on the label).
- Avoid painting on rainy days, humid days (over 85%), and days with low temperatures (below 5°C).
- Do not freeze the product, keep it indoors (storage temperature 5~35℃) avoiding fire and direct sunlight, and store it unopened facing the top.
- Store the remaining product after use without cement mixing in the same way.
- Products with frozen contents should be discarded.
- Dispose of waste paint through a waste disposal company designated by the Ministry of Environment.
- Use the product within the storage period (marked on the label).