Skip to content Skip to main menu

Products

COREF Co., Ltd.

Paints & Exterior Coats

ARTY DECOTEX

ARTY DECOTEX is a water-soluble eco-friendly pattern paint for interior decoration of buildings that creates a variety of patterns with a combination of particle size and color to express a colorful three-dimensional effect.

◆ Product Features
- Water-soluble finishing materials using silicone acrylic polymers have excellent adhesion, durability, water resistance, and pollution resistance.
- Excellent workability, almost no smell.
- Fast drying and hard coating.

Usage

Application inside apartment stairwells, corridors, elevator halls, kindergartens, hotels, hospitals, officetels, etc.

Properties

- Main ingredients : silicone acrylic polymer water-based paint
- Application equipment : Use only the Decotex spray gun or bontile sprayer
- Color : 37 Colors
- Specific gravity : 1.00 ± 0.03
- Drying time (25℃) : 24 hours of hardening drying
- Thinning (dilution rate) : water, not more than 20%
- Theoretical Quantity For Application : 8 – 11㎡ / L
- Shelf life : 6 months (5-35℃ indoor storage)
- Packing unit : 18 kg / Plastic Pail

Application Method

■ Application Conditions
- Painting surface : Concrete, Cement, Gypsum board, Light weigh beam Building, etc
- Surface preparation : Remove moisture, oil, rust, soil, and other dirt from the coating and fill the grooves or cracks with putty before sanding.

■ Painting procedure
1) Base Coat
- After cleaning the background, check that there is no dust or foreign substances on the surface, and paint it 1-2 times using a roller, brush, or spray gun to absorb and penetrate the work surface.
- If necessary, dilute the clean water to less than 5%-10% according to the painting conditions.
- If the surface of the painting is heavily absorbed or the surface of the painting is insufficient during a single painting, additional paint shall be applied.
2) Middle Coat
- After painting the base coat at 25℃ for at least 24 hours, check the dryness and paint the middle coat.
- Before use, stir the paint contents evenly. (Never stir with an electric mixer)
- If necessary, dilute the clean water to less than 5%-10% according to the painting conditions. (Never mix organic solvents)
- When painting the middle coat, paint the nozzle with a diameter of 3 to 5 mm and a injection pressure of 2.5 to 3.5 kgf/cm².
- Injection paint tools (exclusive guns) should be painted at a distance of 50 to 60cm perpendicular to the painting surface.
- When painting, the color and pattern formation may differ from the sample depending on the painting pressure, painting speed, painting distance, painting equipment, etc. of the worker,
so make sure to use it after the test painting.
3) Top Coat
- After painting the middle coat at 25℃ for at least 24 hours, check the dryness and paint it with a roller, brush, and spray gun to absorb and penetrate the work surface.
(Please keep in mind that dry hardening time may vary depending on the change of season.)
- If workability is required, dilute clean water to less than 10-15% and paint it once or twice.

Precautions

- Use the paint designated by our company for Base Coat.
- Dilute the water to form an appropriate pattern and stir it evenly with a stick. Please refrain from stirring by the machine because the pattern is destroyed.
- Even if the product is of the same color number, it may differ somewhat from the standard color because of the distribution volume or Base Coat paint color.
- Do not allow paint to come into contact with eyes.
- Be careful not to freeze paint storage or transportation.
- Do not mix this product with other paint.
- Wash exposed skin clean after painting.
- Be careful when painting work surfaces containing plasticizer, foam wallpaper, leather sofa, etc. as contamination, stickiness, discoloration may occur.
- If the temperature is below 5°C and the relative humidity is above 80%, the drying will be poor and the adhesion and durability will be reduced, so painting should be avoided.
- Paint at atmospheric temperature above 5℃ and relative humidity below 80%. And the work surface should be at least 5℃ without freezing.
- When painting the repair on the previous coating, check if it can be used on the coating.
- Even if it's the same color, the pattern and color may vary slightly depending on the worker, painting method, painting condition, and painting distance.
- Never paint sealants, PVC products, etc.
- Paint is prohibited on areas where oil paints such as wood, steel, plastic, etc. are painted because they are poorly attached.
- After painting, wash the painting equipment with water immediately and store it.
- Keep this product out of reach of children, and be careful of disposal and storage because it is harmful to animals and plants.
- It shall be stored in a place where it can be protected from direct sunlight and bad weather between 5°C and 30°C.
- Use the product within 6 months. (Unopened products only)
- If a product is opened, seal it and use it as soon as possible.
- Dispose of waste paint in accordance with relevant laws.

Construction example

Color Charts


Technical Information

관련서류