Products
COREF Co., Ltd.
Paints & Exterior Coats
ARTY CEMENT VINTAGE (WALL)
ARTY CEMENT VINTAGE(WALL) is a paint designed mainly with water-soluble acrylic resin and inorganic pigments and are a two-component paint with excellent water resistance, alkaline resistance, durability, and weather resistance.
It is an eco-friendly cement texture paint that does not contain harmful heavy metals that can be applied mainly to inner walls and ceilings to realize cement texture.
It is an eco-friendly cement texture paint that does not contain harmful heavy metals that can be applied mainly to inner walls and ceilings to realize cement texture.
Usage
- Surface of concrete, cement building, mortar, gypsum, etc
- Commercial spaces such as hotels, cafes, department stores, exhibition halls, and office buildings
- Residential spaces such as luxury villas, pensions, etc
- Commercial spaces such as hotels, cafes, department stores, exhibition halls, and office buildings
- Residential spaces such as luxury villas, pensions, etc
Properties
- Finish : Matt gray, Matt light gray
- Composition : two-component type (powder 3 : resin 1)
- Solid content : 79%
- Number of coats of paint : 1 time
- Painting equipment : Earth hand
- Dry film thickness : 500-1,000μm
- Theoretical Quantity For Application : 1.6 kg/㎡
- Thinning (dilution rate) : Water, within 5%
- Drying time (25℃) : 12 hours (dry-hard)
- Shelf life : 12 months (5-35℃ indoor storage)
- Packing unit : 20 kg (12 kg powder, 4 kg resin) / Plastic Pail
- Composition : two-component type (powder 3 : resin 1)
- Solid content : 79%
- Number of coats of paint : 1 time
- Painting equipment : Earth hand
- Dry film thickness : 500-1,000μm
- Theoretical Quantity For Application : 1.6 kg/㎡
- Thinning (dilution rate) : Water, within 5%
- Drying time (25℃) : 12 hours (dry-hard)
- Shelf life : 12 months (5-35℃ indoor storage)
- Packing unit : 20 kg (12 kg powder, 4 kg resin) / Plastic Pail
Application Method
■ Surface Preparation
- When applied to a new building, the cement surface shall be sufficiently cured for at least 28 days (based on 25℃, relative humidity 50%).
- The appropriate moisture content should be kept below 10% and should be clean to prevent LAITANCE, cement powder, sand, soil, and oil on the surface.
- Fill the gap or groove with putty, adjust the surface, and plastering the front with putty.
- Paint sanded surfaces with water-based binders to improve adhesion after front putty.
■ Product use and Application
- Mix well so that the contents are evenly mixed before painting, and stir frequently during use.
- On the prepared wall, first, plastering the Arty cement vintage(For interior walls) with a trowel(with a humidity film thickness of less than 1000㎛ once). Partially spray with water and then do the plastering with trowel again.
- After completely drying the Arty cement vintage(For interior walls) , lightly polishing the entire surface with sand paper(#320~#400).
- If you need pollution resistance and gloss after complete drying, our water-based Arty transparent coating is recommended.
- If dilution is required, mix and use water within 5%, and avoid excessive dilution as it may affect dichromatic phenomena, workability, poor concealment, and general properties.
- Excessive film thickness paint on a single painting causes poor drying and poor physical properties, so divide it by the number of coats of paint, and paint according to the recommended dry film thickness. If you paint repeatedly, you must follow the repainting interval to ensure that it is sufficiently dried before painting to prevent stains or marks.
- When applied to a new building, the cement surface shall be sufficiently cured for at least 28 days (based on 25℃, relative humidity 50%).
- The appropriate moisture content should be kept below 10% and should be clean to prevent LAITANCE, cement powder, sand, soil, and oil on the surface.
- Fill the gap or groove with putty, adjust the surface, and plastering the front with putty.
- Paint sanded surfaces with water-based binders to improve adhesion after front putty.
■ Product use and Application
- Mix well so that the contents are evenly mixed before painting, and stir frequently during use.
- On the prepared wall, first, plastering the Arty cement vintage(For interior walls) with a trowel(with a humidity film thickness of less than 1000㎛ once). Partially spray with water and then do the plastering with trowel again.
- After completely drying the Arty cement vintage(For interior walls) , lightly polishing the entire surface with sand paper(#320~#400).
- If you need pollution resistance and gloss after complete drying, our water-based Arty transparent coating is recommended.
- If dilution is required, mix and use water within 5%, and avoid excessive dilution as it may affect dichromatic phenomena, workability, poor concealment, and general properties.
- Excessive film thickness paint on a single painting causes poor drying and poor physical properties, so divide it by the number of coats of paint, and paint according to the recommended dry film thickness. If you paint repeatedly, you must follow the repainting interval to ensure that it is sufficiently dried before painting to prevent stains or marks.
Precautions
- Do not use it for anything other than its intended use.
- Do not mix with other paints.
- Be careful not to freeze when storing or transporting paint.
- Keep it indoors (storage temperature 5~35℃) avoiding fire and direct sunlight, and store it unopened facing the top. Store the remaining product after use in the same way.
- Avoid painting on rainy days, humid days (over 80%), low temperature days (below 5°C), and high temperature days (surface temperature above 40°C).
- Dispose of waste paint through a waste disposal company designated by the Ministry of Environment.
- Use the product within the storage period (marked on the label).
- Do not mix with other paints.
- Be careful not to freeze when storing or transporting paint.
- Keep it indoors (storage temperature 5~35℃) avoiding fire and direct sunlight, and store it unopened facing the top. Store the remaining product after use in the same way.
- Avoid painting on rainy days, humid days (over 80%), low temperature days (below 5°C), and high temperature days (surface temperature above 40°C).
- Dispose of waste paint through a waste disposal company designated by the Ministry of Environment.
- Use the product within the storage period (marked on the label).